top of page
  • Facebook
  • Instagram
2024 RR 300 Racing 2T

2024 RR 300 Racing 2T

PriceFrom $17,045.00

Introducing the MY2024 Beta RR 300 Racing.

Is it possible to improve the frame, suspension and performance of a World Championship-winning motorcycle? It's not easy when the bikes in question are those of Steve Holcombe or Brad Freeman, but Betamotor's technicians like a challenge, and so two major innovations have been added to the 2024 RR Racing models, doubling the rideability, power and fun! Beta's flagship racing bike, the 2024 RR 300 Racing 2T now features a new engine with dual spark plugs, with most of the other RR Racing range receiving a new frame. Rounding off the package are new graphics and high-level, race-ready components.

Engine: The engine of the multiple world championship-winning Brad Freeman is known in the offroad landscape for its torque and linear power delivery. Able to offer excellent progressive power throughout the range while providing top-end performance when needed. With the introduction of a new cylinder head with a dual spark plug system, these characteristics are further improved: the delivery is even more linear, and although the maximum power is increased, the ability to manage the output has clearly improved. This result has been achieved thanks to the two spark plugs, which provide numerous benefits:

- They offer improved distribution of the fuel ignition points in the combustion chamber, providing less fuel consumption, making the system more efficient and achieving a significantly lower residue level thanks to the greater carburation stability at all engine speeds. This translates into smoother delivery.

- The engine's range of use is further extended, with its greater torque and more power.

- The two spark plugs are managed by a completely separate electrical system. So, if one of the spark plugs should foul, the engine will still be able to run, although with less efficiency, allowing the race or off-road session to be completed.

Frame: all new 2024 RR Racing models, (excluding the 125 and 200), feature a completely new frame. The steering tube spars have a larger section than in the past (10mm), introduced in order to provide greater rigidity to the bike and to reduce the overall flex. In terms of the ride, this translates into greater precision on entry into and during turns, where the greater rigidity allows the bike's trail-holding to be improved with a truer and more direct response. This main modification, already successfully used in competition by the Official Team, brings with it a series of adaptations in the supports and engine mounts, introduced to support the new frame characteristics. In addition to the above modifications, the footpeg mounts and the rear brake cylinder mount have also been modified. More specifically, the footpeg mounts are now narrower at the bottom, to prevent the possibility of ground contact when riding in deep ruts. The rear brake cylinder mount has also been redesigned to house the new Nissin brake cylinder.

Brakes: the new frame is now able to house a new, higher-performance Nissin rear brake cylinder. This component represents an advance on the previous model and is distinguished, as well as in its outer construction, by its greater braking power combined with improved ability to modulate it (excluding the 125 and 200).

New radiators: the 250 and 300 2T models, as well as the 4T range, receive new lighter and tougher radiators, featuring shaped reservoirs in the upper section in order to allow the bike to achieve a greater steering angle. The new radiators, which provide better coolant circulation for improved cooling, feature a greater number of reinforcements, and are also equipped with a new non-plastic cap which is tougher and less exposed to potential impacts.

Oil mix – 2T Range: For the 2T models within the 2024 RR Racing range, Beta has decided to stick with its choice of doing away with an automatic mixer, so that its Racing bikes continue to set benchmarks for lightness and, as a result, agility. The RR Racing two-stroke bikes must therefore be fueled with oil/petrol pre-mix – a characteristic accentuating the thoroughbred racing nature of this range. These bikes can still be fitted with an aftermarket oil mixer, available as an accessory from the Beta Factory Parts catalogue.

48 mm Kayaba (KYB) AOS closed cartridge fork: Anodised internal parts and the treatments administered to the materials minimise sliding friction, while adjustable compression and rebound damping lets each rider find the perfect customisation of the setting. Betamotor's engineers have recalibrated the component to make it work optimally with the new frame characteristics.

Kayaba (KYB) C46 Rear Shock: The KYB shock can be seen as a gold standard in the racing scene in terms of its ability to absorb the roughness of the terrain, the level of traction transferred to the vehicle and the consistency of performance even under particularly heavy use, and its hydraulic setting can be fully customised by adjusting the external compression (both high and low speed) and rebound settings.

Quick release front axle: immediately recognisable by the red anodised alloy release lever, this component is crucial for saving precious seconds in a race when you need to change a tyre.

Reinforced handguards: the new handguards, designed and manufactured in-house by Betamotor, feature a two-component material mould, in red and blue, which not only give the bike a racing look but also makes them especially hard-wearing in even the roughest off-road use.

CNC aluminium footpegs: to ensure maximum control at all times and ensure no loss of contact with the bike, the RR Racing models are fitted with black racing footpegs with steel pins, featuring a large contact surface area.

Rear sprocket with anodised aluminium core and steel toothing by ZF SPROCKETS: top-class performance, lightness and strength - the perfect mix of all the attributes any racing component must have.

Dedicated red and blue racing seat: with a non-slip top cover and document holder pocket for unparalleled grip, comfort and practicality.

Anodised black shift lever and rear brake pedal.

Gearbox oil filler cap, engine oil filler cap and oil filter cap anodised red aluminium.

Chain tensioners in red CNC aluminium.

New Racing graphics and red and blue wheel decals.
 

ADR and LAMS compliant in all Australian states and territories.

Chassis

Frame

Molybdenum steel with double cradle split above the exhaust post

Wheelbase

1482mm

Max Length

2172mm

Max Width

815mm

Max Height

1270mm

Seat Height

950mm

Ground clearance

320mm

Footrest Height

407mm

Weight (Dry)

103.5kg (Front 50.8kg, Rear 52.7kg)

Fuel Tank

9.5L

Reserve

2.3L

Cooling System

1.3L

Front Suspension

Hydraulic USD Fork with ø 48mm shaft

Rear Suspension

Monoshock with progressive compound lever

Shock Absorber Stroke

135mm

Front wheel travel

295mm

Rear wheel travel

290mm

Front Brake

Wave disc ø260 mm and double-piston floating caliper

Rear brake

Wave disc ø240mm & single-piston floating caliper

Front rim

21 x 1,6 - 36 holes

Front tyre

90/90 - 21

Rear Rim

18 x 2.15 - 36 holes

Rear tyre

140/80-18

Engine

Load less engine type

Single cylinder 4 stroke liquid cooled

Bore

73mm

Stroke

69.9mm

Displacement

292.6mm

Compression ratio

11.4:1

Exhaust Valve

BPV System

Starter

Electric starter

Ignition

AC Kokusan - Digital CDI

Spark plug

NGK MR7BI-8 (x2) 

Carburettor

Keihin PWK 36

Induction System

Induction Reed

Lubrication

Mixing with electrical pump

Clutch

Wet multi-disc clutch

Primary drive

Z.27/72

Transmission

6 gears

Drive

Chain

Engine Oil

SAE 10W/40

Address

1/20 Forge Drive
North Boambee Valley
NSW 2450

Phone

Email

Connect

  • Youtube
  • Facebook
  • Instagram
Midcoast Moto Logo

© 2024 by Midcoast Moto

bottom of page